Product Code: T27DS59N0
The gas hob with a stainless-steel surface design and adjustableFlameSelect.
- FlameSelect® – Gain ultimate control of your flame.
- Pan Supports - continuous cast-iron pan supports for maximum
stability and cooking convenience.
- Wok Burner - powerful cooking at up to 4 kW.
- Sword Knobs - a better feel and easier to operate, the new knob
in an attractive design.
- Stainless steel surface - elegant and sophisticated design.
Features
Technical Data
Product name/family : gas hob w integrated controls
Construction type : Built-in
Energy input : Gas
Total number of positions that can be used at the same time : 5
Type of control setting devices : sword knobs
Min. required niche size for installation (HxWxD) : 45 x 560-562 x
480-492 mm
Width of the appliance : 750 mm
Dimensions of the packed product (HxWxD) : 145 x 793 x 597 mm
Net weight : 14.1 kg
Gross weight : 15.5 kg
Residual heat indicator : without
Location of control panel : Hob front
Basic surface material : Stainless steel
Color of surface : Stainless steel
Length of electrical supply cord : 100 cm
Gas connection rating : 11500 W
Fuse protection : 3 A
Voltage : 220-240 V
Frequency : 60; 50 Hz
N 70, Gas hob, 75 cm, Stainless steel
T27DS59N0
Features
Design
? Stainless steel surface
? black cast iron pan supports with protective rubber feet
Usage convenience
? FlameSelect with 9 steps: precisely control and adjust the flame in
nine defined levels.
? Design co-ordinated control dials: easily access dials in front with
strong grip for effortless turning.
? Ignition via control dials: just push and turn the dials to ignite the
flame.
Burners and power
? 5 burner hob
? Left front: Economy burner up to 1 KW (depending on gas type)
? Left rear: Standard burner up to 1.75 KW (depending on gas type)
? Center front: Wok burner up to 4 KW (depending on gas type)
? Right rear: High speed burner up to 3 KW (depending on gas type)
? Right front: Standard burner up to 1.75 KW (depending on gas
type)
Safety
? Flame failure safety device: prevents unwanted gas flow when
flame goes out.
Installation (gas types & measurements)
? Usable for: Nat gas L/LL G25/20mbar(DE)
NG H/E 20mbar, E+ 20/25mbar Natural gas H 25 mbar (HU)
Natural gas L 25 mbar (NL) Liquid gas G30,31 28-30/37mbar
Liquid gas G30 37 mbar (PL) Liquid gas 50 mbar
? Factory set for connection to mains gas
? Nozzle set for LPG jets (28-30/37mbar) included. Nozzles for
all other gas types can be ordered via the customer service. For
nozzle change, please contact the customer service.
? Dimensions of the product (HxWxD mm): 53 x 750 x 520
? Required niche size for installation (HxWxD mm) : 45 x 560 x (480
- 492)
? Min. worktop thickness: 30 mm
? Power cord: 1 m
? Connected load: 11.5 KW
